Now that all the major modifications had been made to the movable gantry cnc machine, the final part was to calibrate and tram the z-axis again. As a recall, the work being done as major modifications were: The z-axis housing […] ↓ Read the rest of this entry…
This is a continuation of the improvement in the Z-axis for the movable gantry cnc machine. The previous post was about making a more accurate vertical z movement by changing the Z housing from one made of MDF to another […] ↓ Read the rest of this entry…
In the previous post, I had managed to cut the gantry bottom plate reasonably square and accurately. That was a great help in the alignment of the two gantry sides. Using the same exact measurement as the distance between the […] ↓ Read the rest of this entry…
Some updates on the Movable Gantry CNC Machine: At the bed board frame, I found that the holes that I drilled for putting in the X-axis round rods were not positioned as accurately as I had wanted. The rods was […] ↓ Read the rest of this entry…